neatest wiring job....ever

[Timee80]

came across this and it looks amazing. Does anyone have any pics of a neater wiring job than this?? Surely hard to beat

[Hpi_guy]

That's no soldered that's why, look carefully at the esc, there is no wires

[Timee80]

Look again. Look closely. I thinkyou'll find they are. You can see the power wires attached and motor wires in front of the wing

[Hpi_guy]

There's no wire because the 5 silver holes at the back of the speedo are empty, thats where the wire goes, to 2 plugs at the front of the esc are for the power switch and sensor cable

[Jamie.T]

Looking at it closely you can see the corally's and wires coming from the battery and the wires going to the motor. There's no sensor wire connected but the thing is wired up.

What an amazing job. Makes my cars look a mess in comparison.lol

[Reevsey]

switch is in the picture next to the speedo, motor and battery wires are soldered on the bottom of the speed, battery is plugged in and the wires that are soldered to the bottom of the speedo posts are going through the shock tower to the motor, Reciever lead from speedo is running down the chassis to reciever

That is one seriously clean install!! we all can only dream of replicating!!

[SHY]

Check out Olivier's 22, that wiring was truly ANAL! He even made sure the printed text on the wires were aligned... sick!

[Hpi_guy]

I stand corrected, i couldn't zoom in because every time I did the photos disappeared because I'm on my phone, that is neat then, I thought mine was neat

[SHY]

Originally Posted by Oliv996

Still body to be painted but chassis is ready:

http://www.oople.com/forums/showthre...=65713&page=13

[Tom3012]

Sensor wire will be in the other sensor port at the back

[knighthawk]

Great Job Chap !

But its in Rear Motor and as such is easier to install the esc on the rear top deck !

It all gets messy in Mid Motor with the esc at the front !!

But top job never the less !