Quickie re: Speed Passion GT Pro 2.0

[Dave 1975]

Should the fan always be running or should it just come on at certain temps?

and should the low voltage cut off should be set at 6.4 volts?

Cheers guys

[bigred5765]

fans works all the time as long as ithe esc is switched on,
low voltage cut of is for lipo use, we run 3.2 per cell

[Dave 1975]

Good, that sounds like mines ok then!

Yes i'm running orion 5500mah 90c saddles so i'll check on the low voltage setup. I'm not sure, that may be preprogrammed in the GT2.0's default settings..

Thanks big red

Dave