|
#1
|
||||
|
||||
![]()
About 5 weeks ago I notice the original set of madmonkey outdrives were very worn to say the least, and the drive shafts were locking into them on power.they looked cheep and hadn't lasted long,So I changed them for the £20quid is X2c ones.
was working on the car last night and noticed that one outdrive was perfect for about 4 meeting old, the other was worn to buggery ![]() Has anyone else had this sort of problem?to me the only thing I can think of is I had 2 types in the pack,one good quality, and one soft crap std one ![]() talking to my LHS it would seem that in the past few weeks they have had some problems with ansmann packing in kits etc, ![]() ![]()
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 |
#2
|
||||
|
||||
![]()
If you want really hard out drives then go on rcshortcourse.com and look for a thread called hardening blitz out drives it tells you how to make them solid
__________________
|
#3
|
||||
|
||||
![]()
teamc pro kit ones are hard as hell.
race my buggy now for almost 2 year. no shaft or outdrive is worn. racing on dirt clay and yelow sand .no problems just clean the dirt out the outdrives and axles after a day runing.
__________________
PR racing precirotate s1v2/sb401 |
![]() |
Thread Tools | |
Display Modes | |
|
|