|
#1
|
|||
|
|||
![]()
Hi guys,
I'm wondering what oils you guys have been running in your 511 gear diffs. Just installed a set in my buggy and am running 7k front and 3k rear and initial impressions are that the buggy lacks some of the low speed steering I had when I was running ball diffs. Before messing with oils I was wondering what combos other 511 racers have had success with. ![]() Thanks in advance. BC |
#2
|
||||
|
||||
![]()
i run those oils in very high grip situations but tend to normally sit a touch lower
5k front, 2-3 k rear this gives a usable amount of agression. also bin the standard shims and run a larger diameter single shim to the same thickness or you will blow the rear diff ![]() Nathan Ralls
__________________
[SIGPIC][/SIGPIC] www.rcdomination.com Trishbits ~ Nuclear-RC ~ Budsballs ~ Pace Design ~ |
#3
|
||||
|
||||
![]()
Indoor i run 10000 (rear, spool in front)
Build them according the Jilles method. |
![]() |
Thread Tools | |
Display Modes | |
|
|