|
#1
|
||||
|
||||
![]()
Getting the truck prep'd for Astro now... What do people use?
Been using mini pins indoors but guess they'll not be great outside. Any help appreciated. Neil
__________________
Vega RB6 - Orion - Apex Models - JE Models - Cable ties
|
#2
|
||||
|
||||
![]()
Last season there was no real choice for SCT's on astro but Fastrax kourse Kings, which we all adopted to, but they are a hard compound and are now outclassed with better compounds in other patterns so doubt will be competitive, they may be good for the front of a 2WD truck.
Schuey yellow minispikes would be the first choice to try on Astro, although they do balloon on a 2WD SCT with decent power (belting tape may cure this?) A compound dBoots Nanobytes are awesome on carpet with much better wear rates than schuey tyres and they look like they will be as good on Astro as the spikes are a good length so well worth a go. also dBoots have Multibytes in testing and they looked very good at Broxtowe astro track so maybe worth a little wait, not sure on their release date. Either way i've found on a 2WD truck that you need to remove at least the outer rows of spikes/pins on any SCT tyres to avoid grip roll and allow the steering to work faster (yes i have a good servo!) I'm holding off on outdoor tyres until season starts as there may be more choice by then. ![]() |
#3
|
||||
|
||||
![]() Quote:
![]()
__________________
schumacher -bmcc |
#4
|
||||
|
||||
![]()
You were flying on Sunday mate
![]() the blue minipins on back of mine lasted 3 meetings with a 9.5 in, dBoots have done twice that, still look unworn and loads more grip, especially on the wooden bits. Brooky put a 5.5 in his Durango 2WD truck last night... you won't catch that thing! (until it thermals!) |
![]() |
Thread Tools | |
Display Modes | |
|
|