RC10 B2 / B3 spares

[Welshy40]

Guys,

I've got a shed load of spares that I no longer need for the RC10B2/B3.

All items listed with part numbers and costs below and are new in packet as per picture.

Also may consider a trade on a second hand Losi 22 if anyone wants the job lot. All costs dont include postage as I am unsure on true cost until I know what your having.

Front B3 wishbones 9107 x5 (£4.50 per pair)
Rear B2 wishbones 9255 x5 (£6.50 per pair)
Rear B2 cf wishbone 9256 x1 (£6.50 per pair)
B2/3 Diff Gear 9365 x6 (£2.50 each)
B2/3 Rear inner hinge pin 9260 x3 (£3.00 each)
B2/3 Bellcrank pins 9160 (£3.00 each)
B2/3 Front inner hinge pin 9110 x1 (£5.00 each)
B2/3 Front Cross brace 9120 x2 (£1.50 each)
B2/3 Idler gear 9365 x2 (£1.50 each)
B3 kingpin ball end 7211 x2 (£2.50 each)
B2/3 Diff rebuild kit 9351 x1 (£6.00 each)
B2/3 T Nut & thrust bolt 6575 x1 (£2.00 each)
B2/3 diff drive rings 9367 x1 (£1.00 each)
B2/3 servo saver tube/spg 9158 x1 (£4.00 each)
B2/3 Drag link 9165 x2 (£2.00 each)
T3 front axle 7221 x1 (£4.00 each)
B2/3 diff thrust washers 6573 x1 (£2.50 each)
B2/3 gearbox long screws 6928 x1 (£1.50 each)
B2/3 spur gear screws 6968 x3 (£4.50 each)
B2/3 transmission brace 9381 x1 (£5.00 each)
B2/3 trinity b kinwald trans brace (£15.00 each)
B2/3 front bumper 9220 x1 (£4.50 each)
B2 rear hub 0 degree 7365 x2 (£4.00 each)
B3 30 deg ft castr blk 7210 x2 (£1.40 each)
B2 ft 25 deg castor blk 6215 x2 (£4.00 each)
B2/3 RPM 3 degree R mounts (£2.00 each)
B2/3 2 degree R mounts 9266 x1 (£1.50 each)
B2/3 3 degree R mounts 9267 x2 (£1.50 each)
B3 front steering block 7220 x2 (£1.50 each)
B3 0 degree rear hub 7366 x1 (£1.50 each)
B3 1.5 degree rear hub 6366 x1 (£1.50 each)
B2/3 servo saver 9155 x1 (£3.00 each)
B2/3 front bulkhead 9125 x 5 (£4.00 each)
B2/3 gearbox case 9352 x2 (£5.00 each)
B2/3 front top plate 9130 x2 (£6.00 each)
B2/3 rear shock tower 9270 x1 (£5.00 each)
B2/3 front shock tower 9140 x1 (£5.00 each)
B2/3 batt hold down 9230 x1 (£5.00 each)
B2/3 batt hold down short x1 (£5.00 each)
B2/3 clutch disc 6585 x2 (£3.00 each)
B2/3 81t 48dp spur gear x3 (£2.00 each)
B2/3 83t 48dp spur gear x1 (£2.00 each)
B2/3 Hydra drive longer layshaft x1 (£7.00 each)
B2/3 Right diff outdrive hub 9375 x2 (£10.00 each)
B2/3 Left diff outdrive hub 9370 x2 (£10.00 each)
B2/3 Front kick up plate 6296 x1 (£5.00 each)
B2/3 gear cover 9247 x1 (£1.50 each)
B2/3 rear chassis plate x1 (£5.50 each)
Rpm B2 hydra drive gr cover x1 (£3.00 each)
Roll pins 6375 x1 (£1.50 each)

Complete B2 gearbox, slipper and blue motor and chassis plate and Front end with purple chassis plate with no wishbones attached (£22.00)

Various bits out of packets such as b2 and b3 rear shock towers, purple motor plate used, black motor plate black, front bulkhead, standard kit uj set, mip uj spares, 2 layshafts, 1 idler gear, set of mip rear axles, 2 diff gears, 2 gearboxes empty, rear transmission brace x2, several rear pivot blocks, front knuckle arms, bumper x2, b3 blue front axles and castor block plus knuckle arms. 4 rear wishbones (£20)

The link below has a picture.

http://www.oople.com/forums/showthread.php?t=86946