SOLD Schuy CAT SX/2 CF Phil Booth Edition

[s22jgs]

Selling my Cat SX Phil Booth edition as i am sticking purely with 2wd now.
I have replaced the ali pivot blocks with the plastic SX2/3 pivot blocks, and also upgraded to the big bore shocks from the 2/3. This SX is fully upgraded to an SX2.

Only bad point to point out is one of the screws at the rear of the chassis stripped and there is a tiny cut on the chassis where a dremel was used to make the screw usable with a flat blade. Has now effected the strength or performance of the chassis one bit, but needed to be mentioned for trading standards and all that.

I would recommend replacing the ball cups on the sterring and camber links.

PS, the animal version of the cat is not included.

Comes with:
Box & Instructions
3 painted shells
2 clear under trays
1 painted under tray
Original smaller bore shocks
Upgraded big bore shocks
Used front top bulkheads
10 Deg Plastic yokes
7.5 degree ali yokes
Optional rear camber plate
1 new not in packet front arm
1 new not in packet rear arm
spare front left bottom ali bulkhead
spare used front diff plastics
Upgraded front overdrive diff
Ali Pivot blocks (2 slightly bent) and couple of servo horns

NIP Male diff outdrive
NIP Female diff outdrive
NIP CNC 33t Idler
NIP Pivot Screws
NIP Speed pack: M2.5x6 screws
NIP Rear Arms, medium
NIP Bearings 5x9x3
NIP Bearings 4x8x3
NIP CNC 23t Layshaft

Also 2 sets of Cat wheels. One set with worn mini spikes, and ther other with almost new full spikes.

I am asking for £140 collected from rochester/maritime racing/faversham
or £150 via paypal and posted.