|
#1
|
||||
|
||||
![]()
Stupid question and has prob been answered
My 511 rod ends keep coming off which ones are recommended as a replacement I see loads of 511/502's going round with white rod ends What are they? Thanks for any help Dez
__________________
Schumacher Speed Passion Futaba Support from: My Back Pocket Driver - 'Derek' Feedback Link : http://www.oople.com/forums/showthread.php?t=48311 |
#2
|
|||
|
|||
![]()
I've used these for a couple of years.
http://www.jespares.com/electric-mod...tegory_id=1285 Replace all the front ones with these (one pack will do) and you'll never pop another balljoint again. |
#3
|
||||
|
||||
![]() Quote:
http://rclazy.com/shop/accessories/l...ural-losa6015/ Bye. WWD ![]() |
#4
|
|||
|
|||
![]()
You can use losi ball cups but you need to replace the ball joints. I now use the hardend tamiya ball joints with the grey tamiya ball cups.
|
#5
|
||||
|
||||
![]()
I had both a tamiya 501x and Durga and rather than replacing the rod ends i replaced the metal ball studs with the Kyosho ones off the Ultima/Lazer.
These seem a very tiny bit bigger and what it did was take out all the slop and stop the standard rod ends from popping off ![]() Worked great, and cheaper than replacing both rode ends and ball studs, which you'll have to do if u switch over to Losi 4.3mm size
__________________
Schumacher Cougar SV-Durango Dex410-Top Photon |
![]() |
Thread Tools | |
Display Modes | |
|
|