xx4 gearing with novak 6.5 brushless

[Southwell]

LRP speedo, novak motor
Indoors gearing please.

[losidriver70]

Indoor Track where i run is 100x80 XX4 geared @ 17/84 w/novak 6.5 . hope this help out and it has plenty top end and bottom end!

[Southwell]

So 16 on an 82? Seems a lil low but i dont know lol. thanks.
Ive gone 17/82, if im vastly off please let me know

[losidriver70]

Try it run 3 or 4 mins and check temp should be good though!

[ashleyb4]

On my peak 6.5 i run a 22/82 whici is a little low i know people who run higher I would think it should be higher than that ian but im sure someoen will be able to advice alot of people run the novak motors.

A

[markwilliamson2001]

Ian,

I ran a 6.5 novak in my XX4 with a sintered rotor and at 82/16, and it was still pretty warm mate. It all depends on the straight length, if your at Newbury indoors, I would run 82/17 tops!!!

HTH
Mark

[bigred5765]

82/17
ash why a 22 omg u wally in a xx4
have u cheack temp like that

[Southwell]

Cheers guys, i thought i was about right. She picks up like a beast

[Southwell]

So now outdoors with a 5.5R please, big straight but still need punch. 16/82?

[markwilliamson2001]

Nah you could go to an 18, maybe a 19 with 82 spur, if it has the sintered rotor.

I ran my bonded on 82/17 at kiddy, and it got as hot as I would have liked. 'They' seem to think you can run 2-3 teeth higher pinion (with sintered), so I would start on an 18 and see how it goes.

M

[Southwell]

Goodo, cheers mark.