Schumacher Wheels on X4TE

[pro4nut]

For those of you with a stack of pin drive wheels you wish to use

Parts required.

2x U3368 (schumacher part code)
2x 191000128 (ansmann part code)

Simply

1. Remove existing hex and pins.
2. Slide 3 of the shims onto the axle
3. Slide the schumacher wheel disspacers over the axle
4. Refit the drive pins.
5. Refit wheels.


Job's a good un

The shims are critical to prevent binding the spacers into the bearings.
The schumacher spacers have a raised edge which again reduce the chances of binding.

[jim76]

nice one Wayne. How's the offset compare?

[pro4nut]

Using my eye to judge it and having done each side separately so each side had differant wheels the off set is the same.

[jim76]

cool.
forgot to ask, was that both front and rear rims?

[pro4nut]

Yes same treatment to both ends, both rear and front are ok.