|
#1
|
|||
|
|||
![]()
Hi,
I've ordered the new FS2 SP, but I'm fairly new to 1/10 OR (been racing touring and 1/8 OR for over a decade though). There are some new hex'es for this car, right? Kyosho has quite a lot of 1/10 buggy rims, but I know many of them wont fit or are no good (RTR rims), so I need to get the right ones. Which rims are good for this car? Preferably Kyosho. Cheers Ole C
__________________
- XB9 - RX8 - T3 2012 - T1 - X12 - XB4?? -
|
#2
|
||||
|
||||
![]()
Here is a link to the Kyosho 1/10th wheels on our web site:
http://www.m-k-racing.com/index.php?...a&filter_id=14 Marc |
#3
|
||||
|
||||
![]()
To answer the question, the standard wheels will fit fine, the new hexes are the alloy upgrades over the standard plastic version.
White Set: W5201W & W5202W Yellow Set: W5201 & W5202Y There is an older rim out there, you can tell as it has a small lip that runs around the edge of the face of the wheel. Don't use these, use the above part numbers. |
#4
|
|||
|
|||
![]()
Thanks!
__________________
- XB9 - RX8 - T3 2012 - T1 - X12 - XB4?? -
|
#5
|
|||
|
|||
![]()
BTW, I found both W5201 and W5201W at my source. Descrition and price is the same, but is this old and new version?
Ole C
__________________
- XB9 - RX8 - T3 2012 - T1 - X12 - XB4?? -
|
#6
|
||||
|
||||
![]()
W5201 are Yellow
|
#7
|
|||
|
|||
![]()
Thanks
![]()
__________________
- XB9 - RX8 - T3 2012 - T1 - X12 - XB4?? -
|
#8
|
||||
|
||||
![]()
Ansmann rims fit aswell,got a set on my fs2
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|