upgrade SP esc with turnigy box

[OneKiwi]

Ok have gotten a turnigy 2 in 1 box and have a SP GT2.0

The box has turnigy V1.06_100617 on it

Can I upgrade? to SP stuff?

Thru the box the esc has V2.0 100528 Stock

Can I upgrade to V3 SP stuff?

Do I use the SP or the turnigy or the hobbywing pc software?

Thats in the 2WD esc

The 4wd esc has
V1.10_0902 Mod

same questions there can I upgrade.

[Buck_Rodgers]

I've used a hobbywing box with both hobbywing and speedpassion speedos.
Also used both hobbywing and speed passion software for the PC.

In my experience, they're all interchangeable.

Not used a turnigy box or esc so can't help with specifics

[OneKiwi]

Its a speed passion speedo

[Buck_Rodgers]

it should work, but i haven't done it exactly that way, only a similar way

[sparrow.2]

I've got a turnigy box and the speedpassion speedo just like you.

The box will work for settings up to a particular software revision. After that it will stop working for the settings. You cannot update the turnigy box to later box firmwares.

It will however still work as an interface to the programming software so you can downgrade the software on the speedo and have a working box again.

It's all a bit of a pain and unless you need the special stock software it's not really worth the hassle because the mod software works more than well enough.

[OneKiwi]

thanks thats the problem I am having I can upgrade to the V3 esc software and see it on the PC but the box won't see it so I can only have at best the V2 mod software .

Is there a big difference between the v2 and v3 software?

Is the only way to solve this a SP box or a hobbywing box?