what motor pinion

[beasty boys motorsport]

what tooth motor pinion should i use on my b44 roller, car will mostly be indoors (sports hall) and hopefully outdoors in the future, any links would be appreciated

[ian h]

Originally Posted by beasty boys motorsport

what tooth motor pinion should i use on my b44 roller, car will mostly be indoors (sports hall) and hopefully outdoors in the future, any links would be appreciated

All depends on motor and spur size!

[beasty boys motorsport]

motor is a 6.5t and spur i think is standard

[Richard Lowe]

Start around 19-20t, the brand of motor and size of the track matters too - but that should be a good place to start for a smaller track

[gainsy]

Originally Posted by beasty boys motorsport

motor is a 6.5t and spur i think is standard

Correct, the spur fitted is a 84t but there will be a 81t & a 78t supplied with the car spares as well
I have been running a 20t with the 84t on a 5.5t motor but that was mainly at stotfold on astro

[beasty boys motorsport]

cheers gainsy

[Steven Forster]

Originally Posted by Richard Lowe

Start around 19-20t, the brand of motor and size of the track matters too - but that should be a good place to start for a smaller track

ooooOOO think i might have to change my pinion then as im running a 23t pinion 84t spur on a losi excelorin 6.5t motor

cheers

[Col]

Don't change too much - alot is motor dependant.

I run a SP V3 6.5 on 22/84 indoors and use that most times outdoor as well.