Go Back   oOple.com Forums > General > The PlayGround

Reply
 
Thread Tools Display Modes
  #1  
Old 01-09-2011
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default Chris Boardman bikes

Anyone had any experience with them. Looking for a new bike with on/off road etc. Cycling through woods etc. nothing hardcore off road etc.

Liking the spec of the follwing

http://www.boardmanbikes.com/hybrid/hybrid_team.html

http://www.boardmanbikes.com/hybrid/hybrid_comp.html
Reply With Quote
  #2  
Old 01-09-2011
Bungleaio's Avatar
Bungleaio Bungleaio is offline
Mad Member
 
Join Date: May 2008
Location: Leicestershire
Posts: 1,014
Default

They look great and are well kitted out. The problem is they are only available through halfords in the UK and these can be very hit and miss depending on the particular staff.

If you know what you are doing regarding setting the bikes up you would probably be better off assembling it yourself.

Alternatively you could get your local bike shop to do it but they might be a bit annoyed that you didn't buy a bike from them.
__________________
Lets Off Road!
Reply With Quote
  #3  
Old 01-09-2011
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

Have to agree re the hALFORDS aspect and was disappointed to see it's exclusive to them.

Was going to look at Trek, Scott, Giant and so forth.
Reply With Quote
  #4  
Old 01-09-2011
Andyp's Avatar
Andyp Andyp is offline
Senior Member
 
Join Date: Nov 2007
Location: north east
Posts: 902
Default

I would go and check your lbs , most will be trying to get rid of a few of last seasons bikes at the mo as the 2012 bikes are just coming out. You will prob save around £200 on a £1000 bike I would say

One of the lads I ride with has a boardman they do look good and spec is good for the price but as people say halfords is always a bit hit and miss for service and advice !
Reply With Quote
  #5  
Old 01-09-2011
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

Colleague in the office mentioned 2012 stuff coming out soon too. Time for a trip to GA, wiggle and so forth.

I would hope the various retailers are open to test rides
Reply With Quote
  #6  
Old 01-09-2011
Skye's Avatar
Skye Skye is offline
Senior Member
 
Join Date: Jun 2011
Location: Northants
Posts: 626
Default

I would agree with AndyP. A couple of years ago I was in your position and spent hours looking at every bike going. Boardman, Orange, Marin, Trek, Scott, Specialized, and probably a load more I have since forgotten.....

I went to my local bike shop and got about £250 off of a Specialized Rockhopper as it was being replaced by the new model and to be honest the biggest difference (not the only difference but the biggest) was the different paint colour!

It still had disks all round, top of the range rapid fire gear shifts, Rock Shocks adjustable front suspension. All I could need and more, with about 25% off....
Reply With Quote
  #7  
Old 01-09-2011
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

Cool I'll see what deals I can get.

Want to get fit again so road and off road cycling needs to be possible.
Reply With Quote
  #8  
Old 01-09-2011
Si Coe's Avatar
Si Coe Si Coe is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Apr 2009
Location: Wigan - World of Pies!
Posts: 2,737
Default

My brother has a couple of Boardman's - a road bike and a hybrid/commuter bike. Both are very good examples of their type, offering excellent value for money, and having great riding performance for their class/price point.
But in both cases my brother pretty much dismantled and rebuilt them before use. Now in fairness he did the same to his custom Ribble, and I did that to my Klein as well, but it would have hidden any assembly faults.
__________________

Yz4 - Yz2
DEX210 - Cobra 4210- DEX410
RC10 Team - Manta Ray -
RC10T
Mini Trophy - Blizzard - Wheely King
Tz4 - GT24B

BMRCC
Emergency back-up race controller
(but only if nobody better is available)
Reply With Quote
  #9  
Old 01-09-2011
Chequered Flag Racing's Avatar
Chequered Flag Racing Chequered Flag Racing is offline
Spends too long on oOple ...
 
Join Date: Feb 2007
Location: In Early Retirment
Posts: 5,991
Default

Have the Hybrid Pro in White at the moment. Previous ride was the Team version in gunmetal. Sold to work colleague

Bought because I liked the frame style, carbon forks and wanted disc brakes. Some welding I’ve seen on the bottom bracket can be a bit messy so check before you buy.

Only issue I have is the rear brake squealed on both. Been reading it's the frame design which I doubt. Probably the pads are too hard.

Changes, tyres for Specialized puncture resistant, Specialized Toupe saddle in white, and some Ergon grips.

Bargains to be had on eBay if not buying on the ride to work scheme
__________________
o0ple Trader Feedback
NE Venue's New & Old
my space on YouTube
CFR RCTV Channel
Glenn Atterton

BRCA 2005 1/10th Off-Road Veterans Champion
LMP12 National Champion 2003/2004 / F3 class
Reply With Quote
  #10  
Old 01-09-2011
jcb jcb is offline
Mad Member
 
Join Date: Nov 2006
Location: Norfolk
Posts: 1,386
Default

If your happy mail ordering a bike I bought my last one from Edinburgh Bicycle Cooperative and can only say good things about them. Came all built up apart from straightening the handle bars and attaching the peddles and all the tools to finish it off were included in the box.

If your after saving a few pennies it's also worth looking into the cycle to work scheme, where basically your employer buys the bike and sells it back to you via salary sacrifice. As the sacrifice comes from your gross salary you save on the tax and ni deduction and if your employer is VAT registered they will normally pass that saving on to, as they can claim that back from HMR&C. The scheme also includes options such as lights, panniers, helmets and locks so you can get all kitted out with a potential saving of anything between 10 and 50%.

Chequered Flag, try organic pads instead of sintered that stopped mine squealing and I've noticed no difference in wear rate or stopping power
__________________
- X-Factory , Corally , JConcepts , Avid , Exotek , RDRP

Norfolk Buggy Club- Norfolk's 1/10th and 1/8th Premier Off Road Model Car Club in association with BRCA East of England 1/10 Off Road Regional Racing

JemmettFox- Accountants and Business Advisors

Click any of the above to head to the website!
Reply With Quote
  #11  
Old 01-09-2011
mattr mattr is offline
Mad Member
 
Join Date: Mar 2011
Location: Sweden
Posts: 1,838
Default

Quote:
Originally Posted by Si Coe View Post
Now in fairness he did the same to his custom Ribble,
Ribble are also right down there with Halfords when it comes to assembling bikes, i've had to almost completely rebuild several, thankfully i was only daft enough to buy one. On the flip side i'm very particular about building and setting up bikes, but some of the howlers were really quite bad (read dangerous)
Quote:
Originally Posted by Chequered Flag Racing View Post
Only issue I have is the rear brake squealed on both. Been reading it's the frame design which I doubt. Probably the pads are too hard.
Could be the disc design/pattern, or the callipers not square to the disc, one/both of the pistons drag, or contamination, but its unlikely to be frame design (might just need the mounts facing to get the pads to hit the disc square......)

Not got much else to say about the boardmans, only downside is the shop they come from. Which is a shame. Other than that, i'd probably buy one.
Reply With Quote
  #12  
Old 01-09-2011
Chequered Flag Racing's Avatar
Chequered Flag Racing Chequered Flag Racing is offline
Spends too long on oOple ...
 
Join Date: Feb 2007
Location: In Early Retirment
Posts: 5,991
Default

Quote:
Originally Posted by mattr View Post
Could be the disc design/pattern, or the callipers not square to the disc, one/both of the pistons drag, or contamination, but its unlikely to be frame design (might just need the mounts facing to get the pads to hit the disc square......)
Been there and checked it all out as mentioned. Squeal came back with a hundred miles

Boardman on FB
http://www.facebook.com/#!/boardmanbikesbritpack
__________________
o0ple Trader Feedback
NE Venue's New & Old
my space on YouTube
CFR RCTV Channel
Glenn Atterton

BRCA 2005 1/10th Off-Road Veterans Champion
LMP12 National Champion 2003/2004 / F3 class
Reply With Quote
  #13  
Old 01-09-2011
Chequered Flag Racing's Avatar
Chequered Flag Racing Chequered Flag Racing is offline
Spends too long on oOple ...
 
Join Date: Feb 2007
Location: In Early Retirment
Posts: 5,991
Default

Quote:
Originally Posted by jcb View Post

Chequered Flag, try organic pads instead of sintered that stopped mine squealing and I've noticed no difference in wear rate or stopping power
Who grow's them , got a link?
__________________
o0ple Trader Feedback
NE Venue's New & Old
my space on YouTube
CFR RCTV Channel
Glenn Atterton

BRCA 2005 1/10th Off-Road Veterans Champion
LMP12 National Champion 2003/2004 / F3 class
Reply With Quote
  #14  
Old 01-09-2011
mattr mattr is offline
Mad Member
 
Join Date: Mar 2011
Location: Sweden
Posts: 1,838
Default

Quote:
Originally Posted by Chequered Flag Racing View Post
Who grow's them , got a link?
Erm, everybody........ try any of the mail order places, or your LBS (unless its a Halfords or Ribble)
Reply With Quote
  #15  
Old 01-09-2011
mattr mattr is offline
Mad Member
 
Join Date: Mar 2011
Location: Sweden
Posts: 1,838
Default

Loads of pads. There's a starter for 10, i use a combination of green and gold depending on which bike..... usually on opposing pistons.

IIRC Green is organic, Gold is sintered and Red is DH grade organicy type stuff.
Reply With Quote
  #16  
Old 01-09-2011
Chrislong's Avatar
Chrislong Chrislong is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Mar 2006
Location: Bury
Posts: 4,196
Default

Have a look at Bikeradar.com

There's a lot of value to be had from a Local Bike Store (my new Kona came setup by a Pro with 2 free services at any interval), whereas at Halfords your just another customer and once your gone with the sale done the sale experience is complete.
__________________
JESpares JESpares JESpares JESpares JESpares
www.jespares.com
Reply With Quote
  #17  
Old 01-09-2011
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

So what other brands to consider?

Kona
Scott
Giant
Garry Fisher
??
Reply With Quote
  #18  
Old 01-09-2011
Bungleaio's Avatar
Bungleaio Bungleaio is offline
Mad Member
 
Join Date: May 2008
Location: Leicestershire
Posts: 1,014
Default

Specialized

I've just bought a sirrus sport and I'm very pleased with it.
__________________
Lets Off Road!
Reply With Quote
  #19  
Old 01-09-2011
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

http://www.evanscycles.com/products/...-bike-ec023861

http://www.evanscycles.com/products/...024135#reviews

mmmm
Reply With Quote
  #20  
Old 01-09-2011
Skye's Avatar
Skye Skye is offline
Senior Member
 
Join Date: Jun 2011
Location: Northants
Posts: 626
Default

Quote:
Originally Posted by Bungleaio View Post
Specialized

I've just bought a sirrus sport and I'm very pleased with it.
+1

Mines a Rockhopper but two years in and not so much as a puncture.

Ok so it isnt the best bike in the world, its not even the best bike that Specialized make. But Im not a pro racer either, and it is the best bike that I have had. I have had two Marin and an Orange before this one, so they weren't too shabby, but my Specialized is better.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com