Car problems, Help needes ( 1/10 TC )

[read94]

Hi,

Last Night in the finals at my local club i was lined up in 2nd on the grid in the touring cars and then i put the throttle down my car didnt move ? i then had to wiggle the steering servoal times and that was working and finaly i had to stop again and then finaly go but by this time the leaders were already half way arund the track.

I dont have a clue on why my car decided not to move on the grid but 1 it was annoying as i could have won that race and 2 it was lucky no one hit me on the start line.

If you have any ideas on why this happened then all help is appreciated.

Im using a Losi Xclectron sensered and a Novak Ballistic 13.5 motor if you need to know

Thanks Dan

[stegger]

If the servo was operating that mean's you are getting power to operate the servo from the speedo via the reciever. You don't say wether the motor is turning when you give it some throttle ? If the motor is turning then you are looking at a drive ( machanical ) issue.
HTH

[qatmix]

again, need a bit more info. Was it just on the start line? It could be the car actually not being in neutral, so when you push forward its waiting for the reverse signal.

Once you put it into reverse and then move forward it would start.

[read94]

Hi, Thanks for the replys.
yes it was only on the start line and thats how i got it going eventualy by going into reverse then forword