E-Revo Roller - Upgraded + Spares

[Rusty_Noob]

Hi guys,

With regret I've decided I need to sell my E-Revo as I no longer have a chance to use it.

Without doubt this has been the most reliable and fun truck I've ever owned to bash with and it's also very competitive with truggys in terms of racing.

The E-Revo has had a whole variety of hop ups installed and comes with a whole host of spares.
The main hop ups are,

Tekno Axle carriers – these use the larger and more common 8x16 bearings which means they last alot longer and are more durable, they also use an 8mm axle as opposed to the stock 6mm axle for added strength, cost $40 a pair so $80. http://www.teknorc.com/product_info....roducts_id=988

Tekno sway bar kit – really helps the handling of this truck, it’s the best handling monster truck on the market anyway and these just add to that! http://www.teknorc.com/product_info....roducts_id=934

Traxxas “tube” turnbuckles – lighter and more rigid than stock steel ones – 2 of these for steering / rear toe http://jespares.com/nitro-models?pag...ufacturer_id=2 and 2 of these for the pushrods http://www.wheelspinmodels.co.uk/i/613/

Other hop-ups include
Kifopaint Proline Stripstream body shell, slightly cracked at the rear mounting holes but holds up perfectly.
ProLine aluminium single arm steering rack – more rigid for better steering, can only be used with a single steering servo.
Traxxas hard servo saver spring – when using a single strong steering servo you can run this heavier spring to improve servo hold.
Tekno skid plates – similar to the DE Racing ones, just helps protect the rear of the chassis.
Unlimited engineering hardened steel pivot balls – don’t bend or snap like the stock ones!
In terms of spares you will get
Spare original body shell
Full set of front and rear arms
2 spare “tube” turnbuckles
Loads of spare rod ends
Long travel rocker set with uprated springs
2 shock rebuild kits
2 spare Tekno skid plates
A set of softer springs
2 rear lower arms, 1 upper arm
10 spare axle carriers, all have outer bearings, only some have inner, 6 are brand new with pivot balls and dust boots etc
Rear wing/body mount
Front skid plate
1 spare driveshaft
Original 17mm adapters (used with the 6mm axles)
Spare sway bars of differing thicknesses
1 spare drive shaft
The only “broken” part on the truck is the rear body mount, I use the term broken loosely as it hasn’t caused any issues as the only part broken is the part which holds in the upper hinge pin at the rear, a spare is included but it’s not needed as it still holds the pin in place.

I’m looking to get £250 posted for this, which is less than what the hop ups and spares alone would cost you! For this you are getting the best handling and one of the strongest monster trucks available with enough spares to keep you bashing/racing for a long time!

















Higher res shots availible here http://s49.photobucket.com/albums/f2...le/Erevohires/, I can take more on request.

I forgot to mention this roller also comes with a set of Harakiri tyres on 1/2" offset JConcept Rulux rims, pictured on the truck here.



I understand that this is my first post so you may be wary of me as a seller, I've got plenty of feedback on the MaxBashing forum and also have 100% feedback on e-bay, http://myworld.ebay.co.uk/rusteh101


EDIT: Now £230 posted, I can add a Mamba Monster 2200kv Combo soldered with deans connectors for an extra £150.