|
||
|
 |
|
||||||||||||||||||
|
#1
01-06-2011
|
|||
|
|||
lipo
Hi every one
I have just bought a turnigy 5000mah 40-50c lipo battery and it came with bullet connectors but i kneed dean connectors to fit my car so have you got any advice on what to do as I have no clue what to do with it.  As I am only new to racing but I do have the connectors but dont know how to fit them.
|
|
#2
03-06-2011
|
||||
|
||||
|
Kind of hard to explain over the web unless someone has some good youtube links, but basically you need to remove the old and re-solder the new. If not done this before, may be an idea to take car to your local club as some helpful old hand will gladly show you their soldering expertise, expertise which i certainly don't have, i'm a proper amateur!
|
|
#3
03-06-2011
|
||||
|
||||
|
and make sure not the short circuit the battery connectors, those Turnigy 5000mAh Lipo pack quite a punch when you do... ;p
__________________
Ansmann ARE-2 - 5.5T C4.1 Centro - 7.5T X-Factory SCX-60 - 10.5T Hyper 9e - MMM
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
