SOLD Corally RDX + Spares

[Nick1975]

I am selling this on behalf of a friend’s family as he has recently passed away, It is a Corally RDX but we are unsure of which version it is?? The box with all the spares in has ‘09 Phi on it but we are unsure if the car is the Phi.

The car has been used outside on a tarmac track so the chassis has the usual marks on it , The car is hopped up a little and all alloy parts are the Duraluminium parts which if you know about Corally you will know these are very expensive, The rest of the car would benefit a rebuild as its been sat around for a while.

As you can see from the pics below there are masses of spares with it and it was always looked after regardless of cost, There are nearly enough spares to build another car inc 2 chassis’s (1 x normal with light scratches and 1 x 4mm (not in pics) that has been used once by the looks of it), It will also come with a slightly dodgy painted Protoform Stratus shell

Also the list below are all brand new in packet spares:-

1 x Corally Spur Gear 48DP 81 Tooth £5.00
2 x RDX Graphite Front/Rear Shock Tower (2.9mm) £13.99
1 x RDX GRAPHITE BATTERY STRAP £16.36
1 x Corally - Anti-Roll Bar 1.6Mm Long £6.36
1 x Anti-roll bar wire 1.6 mm, Brass – Short £6.36
1 x Corally RDX LW Diff Output Shaft, Short £15.29
1 x Steering Blocks incl. ball bearings, Narrow – AL7075 (1 pr.) £50
1 x LW Differential front/rear (excl. pulley) – Fine – AL7075 £42.50
2 x Replacement Caps for Driveshafts (8 pcs) £7.15
1 x LW Diff Output Shaft, Long – Fine thread – AL7075 £18.18
2 x Diff Rebuild Kit incl. adjustment screw (1 pc.) £11.25
1 x Turnbuckles 28 mm – Dural. (1 pair) £7.65
1 x Rear Belt S3M (213 mm) £9.09
1 x Diff & Spool 15 mm Bearing Holders (4 pcs) £5.99
1 x Cone Washers 2.5 x 6 x 0.5 mm – 10 pcs £4.55
1 x Short Graphite Wishbone (Extra Hard) (4) £29.09
1 x Bulkhead bridge, Shocktower mount – AL7075 (1 pc.) £20.00
1 x Lightweight Front 1-way Outdrives – AL7075 (1 pair) £18.18
2 x Rear bodypost plate – Graphite £12.73
1 x Upper bumperplate – Graphite £13.99
1 x Bodyposts for horizontal mounting (1 pair) £8.00
1 x Steel Screws M4 x 10 mm – Torx 10 Round Head – 10 pcs £5.45
1 x Toe-in Spacers – 1.0° (8 pcs) £5.45
1 x Lower bumper – Reinforced nylon £9.09
1 x LW Diff pulley – White Delrin (1 pc.) £16.36
1 x Motor Cooling Fan 30 mm (5 – 6 V) with universal plug £11.36
1 x Inner Hingepin Clips 1 mm (8 pcs) & Shims 0.5 mm (4 pcs) £4.79
1 x LW M7 Diff nut – 9 mm hex (1 pc.) £3.64
1 x Coupler Clamp 2° toe-in – Rear (Left) – AL7075 – CS Type £14.55
1 x Large Foam Bumper – X Hard £5.99

Total retail Price for this lot is £443.51


I have been asked to set the price at £250 But if you are interested and have a sensible offer please Email me [email protected]