SOLD Xray T3 Touring Car (EU Rubber Spec) + loads of spares

[Justwalk]

For sale is my nephews T3 in original box with all items from original purchase included - XRAY T3 Touring Car (EU Rubber Spec), Instruction Manual (for maintenance), XRAY Certificate of Authenticity, EU Multi-Flex Setup Chart, Set Up Sheet, Gear Charts, Full A3 size parts diagram and list.

The car is just over 12 months old, purchased from MB Models and has been built and maintained to a high standard, with all the chassis edges and countersunk holes protected with CA glue as XRAY recommend. The car has always been stripped, cleaned and any worn parts replaced on a weekly basis by myself, then setup on my Proffesional Hudy Station.

The car has been used both indoors and outdoor, so the underside of the chassis has some light scratches. The setup which is currently on the car is for indoor medium traction carpet, for which I’ll provide all the setup details on a sheet. The main differences to our setup to the kit recommendation is that I’ve got H quick roll centres on the front and 1 hole hard rear uprights.

I’ve got quite a few spares to sell with the car – actually didn’t realize how much I’d bought, always liked to be able finish a race day if something need replacing trackside. I’ve calculated (price in bracket) that all the spares below work out to around £200 – hope my other half doesn’t see this listing!

New In Packet

308331 T3/T2 Shock Body Parts Short (£6.99)
302363 T3 4 degree Right C Hub T3/T2 (£4.99)
302364 4 degree Left C Hub T3/T2 008 009 (£5.99)
305432 T3 Front belt 3 x 513mm 171 teeth (£12.99)
305446 T3 Rear drive belt 3 x 189mm (£11.99)
303163 T3/T2 Rear Suspension Arm Hard Rubber Spec V2, 3 roll bar mounts (£5.99)
303364 T3 1 hole hard rear upright 0 degree (£5.99)
305324 T3/T2 008 Drive Shaft 52mm - Hudy Spring Steel (£18.99)
305241 T3/T2 008 Drive Shaft Replacement Plastic Cap 3.5mm (£3.99)
302663 T3/T2 Ball Joint 5mm Open (£3.99)
308316 Shock open ball ends (4) (£4.99) 2 left
301202 T2 Lower Bumper Plate (£4.99)
302069 T3 Layshaft support shims (2) (£3.99)
302163 T3/T2 Front Susp Arm Hard Rubber Spec 1 hole (£4.99)
307314 T3/T2 Rear Suspension Pivot Pin (2) (£4.99)
307215 T2 Front Suspension Pivot Pin (2) (£4.99) 1 left
305188 T3/T2 Composite Solid Axle 38T – Set (£25.49)

Used / Not in packet (some new)

305058 T3/T2 008 Diff Pulley 38T with Labyrinth Dust Covers (£5.99)
303352 T3/T2 Rear Upright 0 Outboard Toe-In Medium Rubber (£5.50) x 2
302252 T3/T2 Steering Block Version 2 (£4.99) x 2 (changed these as the screw would have slightly stripped out when racing in competition, though good for back-up / club days)
302046-O T3 Lower suspension holder (£8.00)
303411 Anti-roll bar holder set (£3.99)
303033 T3/T2 Alu quick roll-centre holder 4.9mm L1 + L2 (£10.00)
302044 T2 Lower Suspension Holders (£4.99) x 2 sets (middle hole ones on car)
302078 T2 Bearing holders (£4.49)
305135 T3/T2 Composite Solid Axle Driveshaft Adapters (2) (£8.50)

If you’ve got this far you may be wanting to know how many ££££’s I want?

Ideally wanting to sell as a job lot, so for the car and spares £245 + postage

If anyone just wants the car without all the spares (will chuck in a few bits and bobs to keep you running) £165 + postage

I’ve posted some detailed pictures of the car that can be viewed at:
http://s1143.photobucket.com/albums/...ust/Xray%20T3/

If you would like more pictures of the car I am happy to email further pictures at a high resolution, or you are welcome to view the car.

Item will be well packaged and sent promptly via Royal Mail special delivery (£15) or recorded (£10) - please note you will need to sign for it.

Payment required before posting – if by Paypal this must be as a gift, collection with cash can be arranged if this suits you (live North Sheffield and race at Stocksbridge and Don Valley). I haven't got a feedback rating on here, even though I've sold some other parts before - if you want to check my ebay 100% feedback my username is x12stock.

Please drop me a message if you have a question thanks Justin.