|
#1
|
||||
|
||||
![]()
Hi all
Took this out of my Tam mini, had for around 4 months from new, not had much use, only used for two race days and a practice session, before getting another as wanted to be able to adjust brake settings etc......... Esc features forward, brake, reverse, brushed only, lipo cut off (2s max and nimhs further details below). Have original manual, and if look hard enough original plastic packaging ![]() Looking for £20 posted Cheers matt The tio STORM 19 speed controller has been designed around an intelligent bridge switching processor, this allows far greater control of the motor in drive and braking modes, resulting in much better speed control and fully symmetrical performance with no delay in forwards or reverse. The intelligent braking/reverse software is a life saver for gearboxes and drive trains, it actually monitors the speed and electrical characteristics of the motor whilst in use and automatically stops the motor turning before activating reverse! Giving instant reverse without any excess damage to the RC models drive train! The tio STORM 19 also includes, built in Li-Po cut off protection, this monitors the battery packs voltage, and prevents them from dropping below safe levels. The tio STORM 19 can be programmed to run on NiCAD/NiMH cells or Li-Po cells with one easy press of a button. Another feature of the tio STORM 19 is the two different running modes. Reverse active and Reverse in-active. In effect you are getting two speed controllers for the price of one, a reversible and a forwards only! Add the already legendary 100% waterproof design and the tio STORM X is definitely a serious contender for any RC car or truck! A break down of the tio Storm 19 specification can be seen below
__________________
Oople Trader Feedback Last edited by mattJT; 20-03-2011 at 12:00 PM. Reason: Sold |
Thread Tools | |
Display Modes | |
|
|