|
#1
|
|||
|
|||
![]()
I can't get the clip all the way through to the other side of the motor mount, it seems to always gets stuck on the inner part the motor mount. It gets literally %90 through then it gets blocked by the mm.
![]() ![]() |
#2
|
||||
|
||||
![]()
Just file the ends to a point
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#3
|
||||
|
||||
![]()
there is a post on the durango part of the forum, i needed to make the clip pointy on the end so it was easy to fit in to the other side of the mount,
|
#4
|
|||
|
|||
![]()
Sweet ill try that when I get home. And thank guys for the quick response!
|
#5
|
||||
|
||||
![]()
You can also just shave the curve with a blade to take off the small ridge in there. that's what I did and mine goes in fine now
|
#6
|
|||
|
|||
![]()
i had the same problem and ordered a set of battery strap pins they work perfect and no more fiddling around
|
![]() |
Thread Tools | |
Display Modes | |
|
|