|
||
|
 |
|
||||||||||||||||||
|
#1
04-03-2011
|
||||
|
||||
X-Pro Too wide Front for Competition
I Have Build my new X-Pro , and finds ,the front is .5 cm. too wide for competition rules
 , my front is 255 mm. rim to rim outside  . And the Rules said max 250mm. what do i doo , is there other rims or Hex to use  Cheers from Denmark Sven 
|
|
#2
04-03-2011
|
||||
|
||||
One of the team drives that I know had to file down the ends of the front axels so that it is the correct width.
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210
|
|
#3
04-03-2011
|
||||
|
||||
|
Or you could use the thin alloy hexes 125000670, 2mm thinner than the standard versions, and also trim the end of the thread down to fit flush with the nut, I use low profile wheel nuts and cut the end of the axle down to fit flush with the end of the wheel nut, it fits in the BRCA box that way, I believe thats 250mm wide as well.
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Ansmann Racing
Linear Mode
