|
||
|
 |
|
||||||||||||||||||
|
#1
23-02-2011
|
||||
|
||||
lrp x12 ceramic bearing ?????
Hi i am after a set of lrp x12 ceramic motor bearings tried dms mk racing j e spares and no one seems to have them they only have standard ones if anyone has any or knows were i can get some from pm me thanks
__________________
 There is nothing that gaffer tape and zip ties can't fix............... 
|
|
#2
23-02-2011
|
||||
|
||||
|
Cheaper than the Lrp ones http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT
|
|
#4
23-02-2011
|
||||
|
||||
|
Quote:
|
|
#5
23-02-2011
|
|||
|
|||
|
LRP V12 bearings 4 x 10 x 4mm ABEC 9 ceramics
Hi guys. A pair of the above bearings ABEC9 4 x 10 x 4mm @ £8:25 a pair incl UK 1st class P&P.
If you can find cheaper incl P&P let me know. Alan041049 your first stop for top quality bearings, all sizes.. 
|
|
#6
23-02-2011
|
||||
|
||||
|
are you sure the dimensions are 4x10x4mm?
I measured the inside and it is about 3.25mm and the outside is 9.5mm. Also checked the motor shaft and again is3.25... Am I missing something???
|
|
#7
23-02-2011
|
||||
|
||||
|
@Floudas. You actually made me doubt the size i gave, so i went to the garage, stripped my X12 down and measured up the bearing only to find i was correct.
The actual size is 4 x 10 x 4 as first stated. The end of the shaft is 3.175 (1/8th) but most call it 3.2mm. Maybe that's what confused your vernier. LOL
|
|
#8
23-02-2011
|
||||
|
||||
|
Quote:
Sorry to put you in so much trouble  I bought a pair of speed passion ceramic bearings and in the instructions said they fit the X12 also! but the measurements were these... So I can buy the ones mentioned above! Thanks
|
|
#9
23-02-2011
|
||||
|
||||
|
You didnt put me in any trouble floudas, it was the perfect excuse to disappear out the garage instead of watching Eastenders. Lol
|
|
#10
23-02-2011
|
||||
|
||||
|
Quote:
 I understand, I am married too...  cheers
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
