|
||
|
 |
|
||||||||||||||||||
|
#1
26-02-2011
|
||||
|
||||
Rudebits B4 under servo weight
Will the B4 servo weight fit under the servo in the x6?
If not, I can't see how the normal rudebits x6 servo weights will fit behind the servo with the new saddlepack chassis? The wall has to be taken down from behind the servo on the chassis, to allow the speedo to fit in front of the saddles. The only way to get it to fit, is to either shave the weights down slightly front and rear, or move the servo forward a few mm. Is this right?
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: 
|
|
#2
26-02-2011
|
|||
|
|||
|
It is tight with them Mark, but with "most" conventional ESC's they will fit in still between servo and speedo
__________________
 ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
|
#3
26-02-2011
|
||||
|
||||
|
I have a Speed Passion GT2.0 LPF...How big (front to back) are the servo weights, just so I can do some measuring!
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint ::
|
 |
| Thread Tools | |
| Display Modes | |
|
|
X-Factory
Linear Mode
