|
#1
|
|||
|
|||
![]()
Just put 13.5 brushless in my Mardave V12 and it runs backwards. I usually reverse the control on my Sanwa Gemini 2, but wondered if it makes a difference? If it does I could just mount it on the other side.
Your opinions please. Markyp |
#2
|
||||
|
||||
![]()
You should set the speed control up first.
If it refuses to set up in the normal position (some do), try to set it up with the throttle reversed. |
#3
|
|||
|
|||
![]()
Will it affect speed of motor if I reverse the throttle control?
|
#4
|
||||
|
||||
![]()
If you,ve wired it up as per instructions just mount the motor on the other side of the motor mount.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
#5
|
||||
|
||||
![]()
Wire as instructions (A to A, B to B, C to C), set Ch2 on the transmitter to normal, do the first-time-setup on the ESC again. Then if it runs backwards, mount the motor to the other side of the pod.
Some transmitters have a 70/30 split on the throttle travel, so if the ESC has been setup for 70% forwards, swapping the stick direction will change that 30% forwards. |
![]() |
Thread Tools | |
Display Modes | |
|
|