RC18B2 Setup - Essex National

[Matisse]

first run with the car was the essex national, so a lot of tweaking went on leading to a round by round improvement.

ended up with:

Gearing:
spur - stock
Pinion - 12t
6800kv motor
18a ezrun speedo


Front;

3 racing shocks
piston - 1x1mm hole
Spring - AE Gold front
Oil - AE 35wt
Tyres - Losi Street Meat Narrow
Arm mount - inner
Tower mount - middle
camber - -1.5deg
notes;
CA glue on outer wall of tyre, slight toe out,
Extoek pro steering hubs and Caster Blocks using longer caster link,
two washers under steering ball to reduce bump steer

Rear;

3 racing shocks
piston - 1x1mm hole
Spring - AE Silver rear
Oil - AE 25wt
Tyres - Losi Street Meat
Arm mount - Outer
Tower mount - Middle

Body - AE RC18B2
Wing - Phat Bodies Bat Wing


Car was balanced and easy to drive