|
#1
|
|||
|
|||
![]()
please can anybody advise on what type of lipo charger we should get, me and my son are new to this hobby and any help would be very helpful? thanks martin and harry
|
#2
|
||||
|
||||
![]()
Personally I don't think it matters. Just make sure that it either has a balancer built in, or so as I did and get a separate balancer.
Only other thing that springs to mind is that it can charge at 1C - if your lipo's are 4200mah make sure it can charge at 4.2amps... As with most things in this hobby alot of people seem to spend substantially more than is needed (I know I have on a few things). eBay is a good place to look - post a link before you buy and someone will tell you yay or nay!
__________________
|
#3
|
|||
|
|||
![]()
Is an imax b6 ok for a charger and for lipos at 4.2 mah
|
#4
|
|||
|
|||
![]()
yeah you can get them from Hong Kong for £20. I use one and it's as good as any other charger I've used.
|
#5
|
||||
|
||||
![]()
my brothers got one one an its a great little charger smaller then most of the very expensive ones
|
#6
|
||||
|
||||
![]()
Just bear in mind cheap charges use cheap low quality components and your charging a potential fire bomb. You get Wat you pay for.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#7
|
||||
|
||||
![]()
Im pretty new to this lipo stuff to and i just bought one of these.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT should get me going anyone else got 1 of these???
__________________
"No, he didn't slam into you, he didn’t bump you, he didn't nudge you. He rubbed you. And rubbin', son, is racin'." If u can't beat them join them ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|