E-Speed hangers

[ttboyy2k]

Can anyone please tell me how many millimeters lower the ballastud is when I run the E- Speed hangers in the low position versus the high position?

[super__dan]

Depends on what type of neck ballstud you have to some degree, I'm afriad I've not got my gear though to measure.

[ttboyy2k]

What does it matter what neck of ballstud u run if the e-speed hanger is mounted in the two rear camber holes on the bulkhead?

[super__dan]

Apologies I miss read you post, I thought it was against standard location. By way of penance I'll measure it tonight

[super__dan]

I think it's about 3.25mm

[YoungChazz]

You can also change the height in either position by shimming under the part when you put it on the bulkhead.

[MOGGIE XL]

I was just wondering what exactly do the e-speed hangers do to the handling of the X6 compared to just putting the ball stud in the bulkhead.They can be fitted either way round as well what will it do if you have them high or low.

[YoungChazz]

I know Ellis gave a long detailed answer to this question in another thread, just don't know which one...