SOLD For sale X-6 squared - high spec - brass, k factory losi shocks etc.

[Colinevan]

Now sold.

Thanks I have for sale my very little used X-6 squared.

It has the following optional parts.

X6 squared kit with new plastics B4 FT - no slop anywhere.
new plastic chassis (lipo) with 1 practice run only.
Losi shocks ( correct ones red pistons )
Brass weight kit ( not fitted the side pods for when its wet or the weight that fits behind the servo.)
K factory front tower and alloy brace
Trishbits front brass weight piece
E speed hangers (blue)
Front wing
New shell and wing painted by kifo paint ( used for 10 mins only )
Longer cvd's
Lunsfords but does have ft camber links
Ft Servo mounts
Drilled wing mounts with allen key heads and anodised washers.

I built this and just havn't got time to race, iv used it on practice only when i wasnt racing and it has minimal marks on the chassis ( could almost pass of as new ).

The only changes iv done is removed the alloy top plate, and brace as i managed to put a hairline crack on the graphite original chassis. This happened at low speed and i would seriously recommend that if anyone has an alloy front brace and top plate to remove. I purchased a new plastic chassis and top plate and its been used on practice only when i was running my 4wd.

Its immaculate.