3vcs mode

[MatJohnson]

Just added the 2.4 module to my 3vcs to replace the spektrum stuff. Should the transmitter be running in PPM or HRS?

[bodgit]

Got mine set to ppm

[Dazzler]

Mine is set to hrs... which I believe takes advantage of the higher response speed . Something the Futaba 2.4 is capable of utilising. But i'll stand corrected if anyone knows different.

[blue_pinky]

I have mine set to HRS for the same reason as Dazzler, using the same futaba module/receiver. Both work fine with the futaba 2.4ghz stuff as far as I know!

HRS mode didn't work on the Spektrum receivers I had before.

[Big G]

Mine's on PPM, but I have futaba mod/receiver. My receiver is the orange one whereas my module is the blue one. do I have the slower piece in my tranny? I checked with a friends orange one and the part numbers are the same :S

[super__dan]

Is it FAAST by Futaba?

If so and you have a digital servo then yes use HRS

[Body Paint]

You can use either with the Futaba 2.4g but as Dan points out you should only use HRS if you have digital servos

[Big G]

ah I only have KO 2343 in mine

[MatJohnson]

Interesting, i've got a savox low profile digital deely, so might as well use HRS.

[Rob_B]

Dont mean to hijack the thread but i have a 3vcs and cant figure out how to turn the brakes down they are far to sharp. Can anyone help. Thanks

[Big G]

turn down the ATL on the top left. that'll calm them down

[Body Paint]

Originally Posted by Big G

ah I only have KO 2343 in mine

That's fine G, it is digital

[Body Paint]

Originally Posted by Toadeh

Interesting, i've got a savox low profile digital deely, so might as well use HRS.

It would be rude not to

[Big G]

oh. it won't let me change to HRS in the mode page strangely. maybe cos I have the blue module that isn't FAAST or something

[MatJohnson]

Are you pressing the + and - buttons together for a second? the memory changes to HRS, then turn the tranny on then off and it should be in HRS.

Still none the wise as to why to use HRS mind

[Dazzler]

In HRS mode, the Latency (e.g. Time from actually pushing the throttle stick forward to the time the receiver has received the signal and output the signal to the servo) is reduced.

The Spektrum Pro unit you had previously and are now selling, has a higher latency, spektrum produced a Pro DSM system which utilised HRS to reduce latency.

[MatJohnson]

Ahhh, I would be amazed if at my ability I even notice that difference

Ta though

[Big G]

Originally Posted by Toadeh

Are you pressing the + and - buttons together for a second? the memory changes to HRS, then turn the tranny on then off and it should be in HRS.

Still none the wise as to why to use HRS mind

yeah I read the manual hehe. sorted now.

[SlowOne]

Ah yes, Rule 1 of being a male - if in doubt, RTFM. Read the f*****g Manual!!