Go Back   oOple.com Forums > Trade Room > For Sale

 
 
Thread Tools Display Modes
  #1  
Old 13-09-2010
Tron Tron is offline
Member
 
Join Date: Apr 2010
Posts: 37
Default XRay 808 roller 2010 spec + spares

Selling my current 808 2010 spec roller which was new at the start of the summer season.

Kit includes:
  • XRay 808 2010 spec rolling chassis
  • Original box
  • Certificate of authenticity (woooow!)
  • Original manual and photocopied setup sheets
  • Left over parts from original build, airfilter, servo parts etc.
  • 1 JConcepts Illusion pro painted shell and an xray low profile spare thats seen better days
  • Front ally shock tower
  • Ally steering plate
  • Lightweight Answer RC wheel CVDs
  • Lightweight diff out drives
  • 3 bearing diff pinnions front and rear
  • Answer RC brake pad return springs
  • 2.8 rear roll bar
  • 2.4 front roll bar
  • Complete set of shock springs
  • 1.3, 1.4 and 1.5 shock pistons


Used spares:
  • 2.6 front roll bar
  • 2.8 front roll bar
  • 2.6 rear roll bar
  • 2 white rear wings, 1 with wing wrap
  • 1 yellow rear wing
  • Front shock tower
  • Center diff spur gear
  • 2x 2 bearing pinnion & spacers
  • 6x standard out drives
  • 4x standard CVD's
  • 2x front wishbone arms
  • 5x 16/17 tooth clutch bells
  • Fuel tank


New spares:
  • Rear shock tower
  • 2x Shock stand offs
  • 6x steering bearings
  • 6x diff bearings
  • 8x inner wheel bearings
  • 11x pinnion bearings
  • 26x clutch bearings
  • 4x closed ball joints
  • 2x front wishbone arms
  • 6x shock boots
  • 2010 spec diff bulkhead
  • 2x rear camber link bal joints
  • 2x front camber link ball joint
  • Diff casing
  • 3x shock bottoms
  • Servo saver set V2
  • Front bumper
  • 10x O rings - 10 x 1.5
  • 10x O rings - 10.1 x 1.8
  • 7x O rings - 6 x1.5
  • 2x Rear shock shafts
  • 2 pinnion spacers for 3 bearing pinnion
  • 2x steering ball joint V2
  • 2x 2 x 11.6 drive pins
  • 3x steering relief ball joint
  • 21x 2.5 x 13 drive pins (no idea why i have so many of these!)
  • 6x 6 x 13 x7 drive pins
  • 4x camber link turnbuckles
  • 2x steering turnbuckles
  • 3x diff gaskets
  • 2x 2010 spec shock body nut
  • Shock shim set
  • Rear hub carrier shim set
  • Brake/throttle linkage set
  • Ally brake cam set
  • Avid Phenolic brake disks
  • Hardend brake pads


Current setup:
5k/5k/2k diff oils
1.4 pistons front shocks with 50wt oil, silver springs
1.3 pistons rear shocks with 35wt oil, silver springs

All drive pins were replaced 2 meetings ago.
All bearings have been relubed or replaced as required.

Looking for £360
All kit will be sent signed for, recorded delivery.
If paying by paypal payment as a gift or personal payment owed with the payee paying the fees.
I will also accept cheque or postal order but the kit will not be sent until cleared.
I am racing at Pendle next sunday in the final round of the NRS and it can also be viewed or picked up then with cash payment.
I am also happy to meet half way with in reason for people based around Lancashire.










 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com