|
#1
|
||||
|
||||
![]()
I've ran the test modes and Im not sure what to do.
I have steering, the lights scroll up down from holding and releasing but the motor itself isn't working. My transmitter is a spektrum, any ideas what could be causing this?
__________________
XXX-4 |
#2
|
||||
|
||||
![]()
first thing you got to check is the solder fuse, if that is in tact, then you need to check everything from the ESC to the motor for a break in a connection, including the brushes, if everything is fine and the motor turns over on a battery, then you may need to contact Tekin.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#3
|
||||
|
||||
![]()
the motor was recently droped, could that have knocked the brushes out of place?
__________________
XXX-4 |
#4
|
||||
|
||||
![]()
Ok this is weird, i just started turning the pinion by hand and pulling the trigger, and seems to have unjammed whatever was jammed
__________________
XXX-4 |
#5
|
||||
|
||||
![]()
you had a brush stuck in the brush hood, you need to get it looked at, possibly a clean and rebrush, also check if the brush has free movement inside the brush hood.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
![]() |
Thread Tools | |
Display Modes | |
|
|