Nosram esc fan

[smitty]

hi my nosram esc fan wires have broken off inside the question i have is can i wire it to the switch or do i need to take the bottom off it and re solder them back on to the circuit board

[Mike Hudson]

you could just wire them directly to the + & - tabs where the battery wires are or if you like to be neat then take the bottom cover off & resolder it onto the pcb

[ben]

Have they snapped off in the fan or in the speedo? If they've snapped off in the fan you'll struggle to get the plastic cover off the bottom without breaking it.

[smitty]

its snapped off in the esc i didnt think about soldering them to the battery terminals cheers guys