|
#1
|
||||
|
||||
![]()
Hi,
Can anyone give me any dimensions (overall diameter, thickness and centre hole diameter) for Losi 10th scale pistons? I am trying to see if they will fit my micro big bore shocks... If someone has some red/pink ones to spare, that would be ace, and I will kindly take them off your hands. Thanks, Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#2
|
||||
|
||||
![]()
The associated pistons have the same diameter than the losi ones.
Maybe try them? |
#3
|
|||
|
|||
![]()
Off the top of my head...
Dia: .400in Thickness: .080in |
#4
|
||||
|
||||
![]() |
#5
|
|||
|
|||
![]()
Had a quick look at this idea on Friday night. The AE/Losi pistons look to be a good fit in the 3Racing shocks. However the hole size is quite abit bigger on the 1/10th pistons, plus they have atleast 2holes.
You could always try the AE blank pistons and drill them yourself to a good size for the 1/18th setup, say about 1mm. |
#6
|
|||
|
|||
![]()
Already tried this I'm afraid, and neither the AE or Losi pistons will quite fit in the 3racing LST shocks.
The stock 3racing pistons are a similar shape to the Losi tho, but the holes will need to be drilled out to 1.10 mm which is the same as the Losi red pistons. 2 holes would be good, and try 35wt front oil and 30wt rear as a starter ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|