|
#1
|
||||
|
||||
![]()
I've put together a CAT SX Phil Booth edition with a 7.5t LRP X12 motor and LRP SXX esc for my son. Can anyone give me a recommended pinion size to start with on the stock spur? I installed a 23t and gave it a quick 5min run but the motor is running fairly hot. Would like it to run cooler than that.
|
#2
|
|||
|
|||
![]()
try a 22t then
![]() |
#3
|
|||
|
|||
![]()
Carl, the X12 motors do run quite warm........
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#4
|
|||
|
|||
![]()
Try a 24 then
![]() Seriously : It don't have much experience with the X12 motors (using SP), but 23/83 is the gearing I us on my SP 6.5. My general experience with BL motors is that they're more sensitive to undergearing then overgearing. |
#5
|
||||
|
||||
![]()
Thanks guys. I've just read some of the team setups and the guys run 21/83 with a 5.5 so I guess going to a 24 or even a 25 is the right direction.
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|