Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 01-07-2007
craigosh's Avatar
craigosh craigosh is offline
Senior Member
 
Join Date: Dec 2005
Location: liverpool
Posts: 445
Send a message via MSN to craigosh
Default nosram matrix evo error code!

Had an issue today with my nosram matrix evo and lipo. Basically the power cuts out after a split second and the blue and yellow led say on. Anyone any idea what this means.

I've tracked the problem down to the lipo pack mind as it ran fine with a nimh, but i'm just curious as to what it the error code means.

cheers

craig
Reply With Quote
  #2  
Old 01-07-2007
bert digler's Avatar
bert digler bert digler is offline
Mad Member
 
Join Date: Mar 2006
Location: 500yds from matty simpson
Posts: 1,608
Default

Quote:
Originally Posted by craigosh View Post
Had an issue today with my nosram matrix evo and lipo. Basically the power cuts out after a split second and the blue and yellow led say on. Anyone any idea what this means.

I've tracked the problem down to the lipo pack mind as it ran fine with a nimh, but i'm just curious as to what it the error code means.

cheers

craig
locked rotor or check there no direct short between phases ie solder run down it also it wouldnt hurt to clean sensor cable with some motor spray
__________________
who knows who cares
Reply With Quote
  #3  
Old 01-07-2007
_sleigh_ _sleigh_ is offline
Mad Member
 
Join Date: Jul 2006
Location: In front of my PC
Posts: 1,920
Default

Quote:
Originally Posted by craigosh View Post
Had an issue today with my nosram matrix evo and lipo. Basically the power cuts out after a split second and the blue and yellow led say on. Anyone any idea what this means.

I've tracked the problem down to the lipo pack mind as it ran fine with a nimh, but i'm just curious as to what it the error code means.

cheers

craig
Double check you have the speedo on LiPo mode. It's the first setting during set-up. I think it should be on '1', but check your instructions.
Reply With Quote
  #4  
Old 01-07-2007
Fiddybux's Avatar
Fiddybux Fiddybux is offline
Senior Member
 
Join Date: Feb 2007
Location: Warrington
Posts: 625
Default

Bad luck Craig!

If the Nosram is like the LRP Sphere, then it should auto-sense the battery type.

I know my LRP Sphere does this.

Hope you get it sorted.
__________________
X-5^2 :: CR2 :: XXX-T MF


Reply With Quote
  #5  
Old 01-07-2007
_sleigh_ _sleigh_ is offline
Mad Member
 
Join Date: Jul 2006
Location: In front of my PC
Posts: 1,920
Default

Both the LRP and NOSRAM will auto sense the battery type, but it can be turned off. So it's always best to check.
Reply With Quote
  #6  
Old 01-07-2007
craigosh's Avatar
craigosh craigosh is offline
Senior Member
 
Join Date: Dec 2005
Location: liverpool
Posts: 445
Send a message via MSN to craigosh
Default

Tried it with and without the lipo mode set and it does it on both so its somthing odd with the pack.
Have to call trakpower tomoz..

So does noone know what the the codes mean? or is it like burt said, an indication of locked rotor?


cheers

craig
Reply With Quote
  #7  
Old 01-07-2007
Scouser's Avatar
Scouser Scouser is offline
Senior Member
 
Join Date: Sep 2006
Location: Liverpool
Posts: 668
Send a message via ICQ to Scouser
Default

Just gone over the sheet and the supplement that comes with the Matrix Evo and there is no mention of possible causes of blue/yellow leds showing. Sorry dude, may be best to contact Nosaram in the morning.
Reply With Quote
  #8  
Old 01-07-2007
craigosh's Avatar
craigosh craigosh is offline
Senior Member
 
Join Date: Dec 2005
Location: liverpool
Posts: 445
Send a message via MSN to craigosh
Default

Lol not that bothered now....
Just wanted to know what it refered to, like to know what these things mean so I'm not scratchin my head (or arse) trying to diagnose future problems and why lights are on that shouldnt be on.!!
Was hopin doughty might chip in an answer being all LRP pro and all...
Reply With Quote
  #9  
Old 02-07-2007
grindog grindog is offline
Senior Member
 
Join Date: Jan 2007
Location: stoke on trent
Posts: 434
Send a message via MSN to grindog
Default

My LRP Sphere TC spec did this. If i pushed the car, it would free up again for a few moments and then fail. I tried it with several motors and it still did it. I had to send it to Horizon and it was replaced down to a fault

Hope this helps
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com