ntc3 spares,tyres,exhaust,setup system,zx5 wheels/spares

[dave g]

just a load of stuff from wardrobe..wife needs the wardrobe space due to iminent purchase of handbags and shoes (for her not me!)

1/8th setup station,used a couple of times but dont race 1/8th anymore £20 vgc sold
1/10th setup station,been used a lot,2 of the setup sides have been dremmeled but doesnt affect it for setup use £14 sold
----------------------------------------------------------------------------------------------------------------------------------------
kyosho lazer stuff zx-5 stuff sold

diff built up ready to drop in £8 sold

new in packet stuff

la220 wishbones £2.50 (1 front+ 1 rear) sold
la210 front bulkhead pack,2 sets £3 each sold
1 set as above but opened £2.50 sold
sp107h carbon rear hubs £3 sold
la206 78t spur gear £1.50 sold
la219-4 knuckle and hub carrier £2.50 sold

wheels all new in packet sold
w5028w white dish rear wheels,4 pairs £2 each pair sold
w5026w white dish front wheels 4 pairs £2 each pair sold


some opened wishbones f+r £2 sold
opened 2 front knuckles and 2 c hubs £3 sold
----------------------------------------------------------------------------------------------------

ntc3 stuff

rd logics turbo 1/10th pipe and header,excellant condition,only used a few times £12 number 61255
rd logics turbo 1/10th pipe and header,stinger bit missing! £6
unknown ntc3 pipe £10
afermarket ntc3 chassis,got some scuff marks,used at euros only £15
5 hpi tyre bags tha have velcro on (hold 4 tyres each) £10 for all 5



new in packet stuff ntc3 stuff

k factory ntc3 low cg fuel tank £5
rpm front impact resisting bumper pn 80272 £4
stock ntc3 fromt foam bumper £2.50
front arm kit 2233 £3
.35 stroke shaft 8844 £2
clutch bearings 2320 £2
4 blue alloy shock caps(fit b3/b4 also i think) £4.50
vcs rebuild kit for macro shock 8456 £1.50
rear exhaust mounting wire 2358 £1
2 speed input shaft 2286 £3
stock 2 shoe flywheel £2
rear hub carriers version 2, 2268 £2
right left steering hub carrier 2247 £2
5/64 thrustballs 6574 £1
center bulkhead bearing cap 2269 £2
throttle/brake linkage kit with horns/collets,no header card £3
front plastic bumper 2226 £2
swing rack 2228 £3
black plastic pillow ball inserts+2 used pivot balls £2,no header card
3 kit plastic spanners £1.50
metal crown gear and 2 pinion gears £6.50 no header card
4 new metal pinion gears £8 for 4
2 kimbrough plastic spur gears for 2 speed,no header card £4
----------------------------------------------------------------------------------------------------------------------------------------


used stuff ntc3

2 blue threaded shocks 67mm total length £4
4 silver alloy diff casing sets(top and bottom) £7 for a top and bottom(couple have been dremmeled for clearance)
metal crown gear+1 pinion lightly used but no wear to it £4
silver center prop shaft £2.50
4 body posts £1.50
miscelaneous bits £5,rollbar,outdrive etc
1 diff unit built up ready to drop in £10,good condition,smooth,metal crown gear.
3 clutchbells,with 2 speed gears fitted £12
single gear on 1 way housing £3
single gear on normal housing with bearing £3

----------------------------------------------------------------------------------------------------------------------------------------


touring car tyres.
20 full sets(80 tyres) all used but very useable,all belted and in good condition,wheels usual scuffs,no split wheels/tyres.

looking to sell tyres in 1 unit if possible £40 for all 20 sets including the box in picture,ideal if you have just started racing touring cars or just need a midseason tyre topup
DUNLOP DO1J
TAKE OFF CS22
TAKE OFF CS22
TAKE OFF CS22
TAKE OFF CS27
TAKE OFF CS27
TAKE OFF CS27
TAKE OFF CS27
TAKE OFF CS27
TAKE OFF CS32
TAKE OFF CS32
TAKE OFF CS32
TAKE OFF CS37
PITS BRCA
PITS?
PIT D40
PIT D98J
PITD98J
ING RACING





postage is not included as people may want multiple items and discount postage then can be worked out
postage costs for small items would be say £1 to £1.50..postage costs combined for multi purchases

paypal,cash,postal orders accepted
cheers
dave


if you want pics of the new in packet stuff let me know,i put the part number in the desription tho.