|
#1
|
||||
|
||||
![]()
hi guys was going through my xx 2wd spares this morning and came accross this. Strange looking fr wishbones i have an entire front end and a pair of spare wishbones but my prob is cant remember wot it was for and would it be worth putting on my xx now?
![]() |
#2
|
|||
|
|||
![]()
In a word....NO, it was useless and never took off, now there are no spares left for it either
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#3
|
||||
|
||||
![]()
thanks darren but just out of interest wot was it supposed to do?
![]() |
#4
|
|||
|
|||
![]()
It was called SACS, Schumacher Active Castor System and it changed the castor angle as the wishbone went up and down (rather than being fixed at say 25 or 30 degress like conventional blocks do)
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#5
|
||||
|
||||
![]()
Yeah it was gay...didnt even make the original fireblade handle any better LOL!!! The new cougar SV looks much better made as well!
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#6
|
||||
|
||||
![]()
you would have less initial caster, to give you turn in, then and the car pitched on the nose and you had suspension compression, it would increase the caster, giving theoretically more mid corner.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#7
|
||||
|
||||
![]()
I wanna see pics of this...
|
![]() |
Thread Tools | |
Display Modes | |
|
|