Just got a 201 what do I need!!???

[dbizzle5]

Just got a 201 and was just wondering if there is anything I need like springs, weights, etc etc

cheers

[DCM]

front springs(running AE Browns at the mo), and weight under the servo and lipo.

[Rich D]

Sorry to thread Hijack, but why the AE brown and not any of the TRF 201 fronts Steve ?

[Rich D]

Originally Posted by dbizzle5

Just got a 201 and was just wondering if there is anything I need like springs, weights, etc etc

cheers

Maybe an RW racing idler gear too Dan ( MK have them )

[DCM]

Originally Posted by Rich D

Sorry to thread Hijack, but why the AE brown and not any of the TRF 201 fronts Steve ?

the kit springs were to soft, and I haven't had time to order up the fronts yet, and not sure if they go hard enough, as I find the 4wd fronts are to soft to.

[DCM]

oh yes, and the RW idler gear, plus the layshaft when it is done!!

[Rich D]

Ah right, ive got the 201 front kit although im unsure which is softest ?

There are green, brown, black in it.

The std ones i know from the 416 are :-

Red - soft
yellow - medium
blue - "hard"
white - harder

If anyone can edit my list to fit the 201 front springs in order then it would be appreciated.

[DCM]

Tamiya USA says

Hard (green), medium (black), and soft (brown)springs included

[Rich D]

Originally Posted by DCM

Tamiya USA says

Cheers mate that helps a little

[DCM]

I know AE Browns were a bit stiffer than the kit springs.

[MikePimlott]

get the 501 spring kit front and rear. the 201 front spring kit is too soft.

lead under servo and cells.

[msxmre]

How much weight are you guys running under lipo and servo? Can the weight be placed anywhere else like on top of lipo battery?
Thanx in advance
Scotty...

[Rich D]

Originally Posted by msxmre

How much weight are you guys running under lipo and servo? Can the weight be placed anywhere else like on top of lipo battery?
Thanx in advance
Scotty...

Tony Evdoka of Rudebits is the man to ask. Can't recommend his service highly enough

[Pedros20]

Hi Dan
I've put the rudebits brass weight ( heavy one) under the servo, Ansmann do a under lipo brass weight too, & Trf blue springs up front & Trf yellows on rear mate, Tried to get it as close to Lee Martins as possible.

[dbizzle5]

Thanks everyone. So at the moment I guess the 411 spring kit and a bit of lead will be fine for the meantime.


cheers

Originally Posted by Pedros20

Hi Dan
I've put the rudebits brass weight ( heavy one) under the servo, Ansmann do a under lipo brass weight too, & Trf blue springs up front & Trf yellows on rear mate, Tried to get it as close to Lee Martins as possible.

[Rich D]

And the RW idler gear bud. Seems luck of the draw as to whether the STD one will hold together. They are only a fiver from MK Racing.

[Lee Martin]

AE brown springs are still too soft unless your racing on dirt?

to add to the 201 kit - i advise

-rudebits brass
-option springs

Then once you want more stuff:

-.5 degree rear hubs
-blue bling
-Ghea pistons
-Rudebits carbon strap

[msxmre]

Lee, Rich and DCM could you let me know which weight you're putting under lipo battery and servo as Tony's got a couple of different weights.
I'm gonna order some.
Thanx guys
Scotty...

[JustARcFan]

Few questions:

to add to the 201 kit - i advise

-rudebits brass 84gr under the lipo + 70gr under the servo
-option springs TRF501X Spring set?


Then once you want more stuff:

-.5 degree rear hubs Where do you use them as on astro and grass we always use 0° or is this something specific for the 201?
-blue bling
-Ghea pistons Which ones for grass and astro?
-Rudebits carbon strap

[DCM]

I made my own tapered pistons!
501 front springs are a little longer I think.... not by much though