|
#1
|
||||
|
||||
![]()
Using the standard exzes 700mah one at the moment, but would like to get longer between charges, are the large. Capacity packs the same physical size, or can someone recommend a good tx pack I can use?
Alternatively, are there any 12v tx chargers available? |
#2
|
|||
|
|||
![]()
You will find some larger capacity NiMh Tx packs on Ebay from Vapextech in differing layouts.
|
#3
|
||||
|
||||
![]() Quote:
if there AA cells look here http://store.modelpower.co.uk/ you can make your own up as for chargers, most of the good lipo chargers that also do nimh will a rx pack with the correct lead, also above site
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#4
|
||||
|
||||
![]()
I think the Much-more lipo tx pack for the M11 fits your radio
|
#5
|
||||
|
||||
![]()
You could fit these http://cgi.ebay.co.uk/8x-AA-2100mAh-...item35a6f1d0ba
I have used these for a couple of years now sinse they came out. They can be charged and left for months at a time and loose minimul voltage. I know i few other racers posted that they too used these. For the price you cant go wrong.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
#6
|
||||
|
||||
![]()
Can you get a lipo in there?
__________________
Nortech is ACE! |
#7
|
||||
|
||||
![]()
If its a Sanwa Exces then Lrp do a 3 cell lipo for it. I've got one in my exces plus.
![]()
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
![]() |
Thread Tools | |
Display Modes | |
|
|