|
||
|
 |
|
||||||||||||||||||
|
#1
25-02-2010
|
||||
|
||||
spaz stix paint
Hi All
I'm going to airbrush my next shell using Spaz Stix paints and i have a few questions to ask - whats the best PSI to use? and can i get away with a 0.5mm nozzle? also what's the best thinners to use to clean up the airbrush? can i use cellilose? Thanks for your help in advance Cheers Paul 
|
|
#2
25-02-2010
|
||||
|
||||
|
you can use 0.5mm, but 0.3mm would be better, and a low PSI setting, 15psi I think.
I use brake cleaner and then airbrush cleaner, as I use it so little.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#3
25-02-2010
|
||||
|
||||
|
i spray it using a 0.5mm iwata at about 15-20 psi and use acetone to clean after,dont use it alot though,
__________________
Mattys the driver,my names carl
|
|
#4
25-02-2010
|
||||
|
||||
|
too bloody expensive for starters!!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#5
25-02-2010
|
||||
|
||||
|
£110 from ebay
__________________
Mattys the driver,my names carl
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
