Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 25-01-2010
Benh's Avatar
Benh Benh is offline
Senior Member
 
Join Date: Apr 2007
Posts: 841
Default Donate your knowledge and save a LiPo

My poor LiPo now has a bad internal connection and with the sealed casing making it impossible to fix, without destroying it.

I have used a couple of different 'Corally' style, (Bullet), connectors in the car.(Spiral and straight spring) But wish to know which people think are the best.

Cost is not a consideration (Unless they cost more than a pack of Competition LiPos)
Reply With Quote
  #2  
Old 25-01-2010
Battle_axe's Avatar
Battle_axe Battle_axe is offline
Thieving scumbag
 
Join Date: Jun 2009
Location: Bicester
Posts: 1,122
Default

Quote:
Originally Posted by Benh View Post
My poor LiPo now has a bad internal connection and with the sealed casing making it impossible to fix, without destroying it.

I have used a couple of different 'Corally' style, (Bullet), connectors in the car.(Spiral and straight spring) But wish to know which people think are the best.

Cost is not a consideration (Unless they cost more than a pack of Competition LiPos)
i have always used the fastrax coralay conectors on my esc and muchmore banana plugs on the charger side of things
__________________
DO NOT BUY/SELL TO THIS USER.
Reply With Quote
  #3  
Old 25-01-2010
DCM's Avatar
DCM DCM is offline
Spends too long on oOple ...
 
Join Date: Oct 2005
Location: Marvelous South Wales!!
Posts: 8,896
Default

If you are carefull, with a blade, you can open the seam, around the cell, once in, there is normally a small board on the connector end, if the problem isn't the connector, leave it well alone....

Oh, and use tyre glue to re-join the case up.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
Reply With Quote
  #4  
Old 28-01-2010
Benh's Avatar
Benh Benh is offline
Senior Member
 
Join Date: Apr 2007
Posts: 841
Default

Quote:
Originally Posted by Battle_axe View Post
i have always used the fastrax coralay conectors on my esc and muchmore banana plugs on the charger side of things
I'll have a look at them Cheers

Quote:
Originally Posted by DCM View Post
If you are carefull, with a blade, you can open the seam, around the cell, once in, there is normally a small board on the connector end, if the problem isn't the connector, leave it well alone....

Oh, and use tyre glue to re-join the case up.
Thanks for the tip.

Although, I am looking to replace these anyway with some 40C's. Borrowed a pack of LRP's and I did notice the difference. Was thinking TP Darks, but not sure at the mo.

Thanks again
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com