DNX408 spec & price announced

[jimmy]

Team Durango have released more information and photos on their upcoming DNX408 1/8th scale nitro buggy - check out their Blog for more information.

Some of the STANDARD features of the DNX408 only from Team Durango

• 5mm thick hard anodised chassis & one of the narrowest, if not the narrowest on the market
• Hard anodised alloy bulkheads front & rear (colour shown is pre-production; production will be hard anodised)
• Gearbox cases front & rear are moulded & separate from the load bearing bulkheads; this gives minimal flex, best bearing alignment, best dirt shielding & easy removal of whole diff & CVD, just like the DEX410
• 15mm bore alloy shocks, PTFE coated ultra smooth & threaded. Alloy caps, alloy cartridge bottom & polished shock shafts; shocks are everything, so these are quality throughout
• 5mm hard anodised shock towers front & rear, as standard
• Forward mounted engine (20mm further forward than some leading race buggies) this gives ideal weight distribution & room for everything to be mounted as low as possible. The RX pack goes under the rear CVD, which is another Team Durango first
• One piece CNC machined engine mount with gold anodised memory plate is standard in the kit & is designed for maximum engine performance & easy maintenance with a marked-up chassis for easier engine alignment
• Rear of the car has maximum ground clearance for smoothest landings so you can get the power down faster
• Radio tray is mounted into the chassis to get centre of gravity as low as possible, but still only 5 screws to slide it out for easy maintenance
• Lowest possible centre of gravity the servos and RX battery are laid down & mounted into the chassis. Engine & tank are also mounted as low as possible
• Top quality, hard anodised suspension holders as standard front & rear with full range of precision moulded inserts for geometry changes
• Angled down stop screws ensure maximum solidity & consistency, without adding weight
• Lightened transmission parts are used throughout as standard
• In board & out board CVD joints front & rear protected with rubber CVD boots
• Centre mounted fuel tank inlet for easy access in any pit lane, with dirt guard as standard
• Super low body to ensure maximum flow over the adjustable rear wing, while the rear wing sits low to again minimise CofG, while oversized end plates (ROAR legal) ensure stability & protect the engine head in crashes
• We have built & tested all the leading cars & our plastics fit, finish & durability is second to none & better than many
• Body, air filter, cultch, once piece CNC engine mount & wheels all included in the kit

The public buying price (street price) for this revolutionary & top quality car is US$699 or 457Euros or 417UK pounds (this price excluded local sales taxes).
Considering the spec of the car out-of-the-box; alloy suspension holders, alloy bulkheads, 5mm shock towers & 5mm chassis all hard anodised, plus black/gold alloy CNC engine mount, lightened transmission; this is a very fair price, something we have worked very hard on.


Read the full details here: http://www.team-durango.com/blog/?p=349

[one]

Fully SICK!

Please bring out an EP version