speed passion lpf

[dave-p]

need a bit of hep here guys, i have lost my instruction manual so i need to know the wiring for a brushed motor, any help would be appreciated, cheers .

[col300]

The manual can be downloaded from the SP website: -

http://www.speedpassion.net/uploadfi...552gt20pdf.pdf

[bigred5765]

looking at the wireing end of the can bLue is Left oRange is on the Right yellow is middle

[dave-p]

its the brushed setting i am after carl.

[bigred5765]

Connected with sensorless brushless motor

When using brushless motor without Hall Sensor, the #A, #B, #C wires of the ESC can be connected with the
motor wires freely (without any order). If the motor runs in the wrong direction, swap any two of the three motor

wire connections.

[sparrow.2]

I've had two mates LPF speedos self-destruct when hooked up to a brushed motor, so be very wary of trying it.

Make sure you set the correct mode on the speedo as it will not automatically recognise the brushed motor.

These instructions are for the venom speedo which is the same as your 1.1 LPF. Speedpassion 2.0 speedos don't do brushed.

http://www.venom-group.com//mmVENOMG...structions.pdf

[bigred5765]

DUDE PAGE 4-5 BRUSHED SET UP AND WIRING INSTRUCTIONS