Ansmann Madrat

[largeagain]

Looks like i will be ordering the Madrat, only to use for "Bashing"

My questions are :

Is it ok to use my Xcelorin BL with the 13.5 ? & deamon 5000mAh 25c Lipo ? Straight out of the box ? (obviously after building it)

Can the Gears handle the above ?

Whats the lowest Turn BL Motor you ppl are using with out no modding ??

What sort of Pinion Spur would be a good starting point ?


On a different note ..... Does any one know if the Royal Flash is also BL Ready from the Box ??

Thanks in advance !!

[bert digler]

Originally Posted by largeagain

Looks like i will be ordering the Madrat, only to use for "Bashing"

My questions are :

Is it ok to use my Xcelorin BL with the 13.5 ? & deamon 5000mAh 25c Lipo ? Straight out of the box ? (obviously after building it)

Can the Gears handle the above ?

Whats the lowest Turn BL Motor you ppl are using with out no modding ??

What sort of Pinion Spur would be a good starting point ?


On a different note ..... Does any one know if the Royal Flash is also BL Ready from the Box ??

Thanks in advance !!

yes
yes
6.5 ok
about a 30
dont know

[largeagain]

Nice One Fella

[carty]

dont bother with the flash, to many issues for brushless

[jim76]

if you can, swap the kit shocks for something else like second hand B4 shocks. One roll and the caps will pop off the front shocks, they are truly awful.

[notme]

Better yet get the ansmann x-pro shocks. Some of the best made today.

[colmo]

AFAIK, a full set of bearings is the most advised upgrade to the basic kit, even above the shocks.