antenna mount

[Sodom]

Hi guys. I recently bought a used BJ4WE and found out that its missing the antenna mount and servo link ( the metal rod that links the servo arm to the steering linkage). Where can i get these especially the antenna mount? Any other ways that i can mount the antenna? Tried stormerhobbies but no help. Thanks

[notlawnomis]

If your in the US just go direct to Jconcepts. then again it doesn't matter which country your in!! Or you could buy an after market antenna and steering linkage, threaded bar would do!!

[Sodom]

Thanks for the reply dude

[bigred5765]

Ariel mount is from a Tc3, or any universal mount will do.
the arm is a turnbuckle and two ball cups any model shop should be able to fit you up

[mattym0310]

i dont think the antenna mount is a TC3 part as my bros factory team doesnt have one, it is built into the chassis.

[notlawnomis]

Originally Posted by bigred5765

Ariel mount is from a Tc3, or any universal mount will do.
the arm is a turnbuckle and two ball cups any model shop should be able to fit you up

Must of ran out of tunbuckles in my kit, only threaded bar was supplied!!

Mount is Part No: AE 31113, if that helps!!

[Andy Moore]

Originally Posted by notlawnomis

Must of ran out of tunbuckles in my kit, only threaded bar was supplied!!

Mount is Part No: AE 31113, if that helps!!

As far as the threaded rod, AE no longer produces the short turnbuckle we used for the steering, so we had to substitute.

We apologize for the missing parts, just email us and we'll send them out.