|
||
|
 |
|
||||||||||||||||||
|
#1
08-10-2009
|
||||
|
||||
ZX5 for Worksop virgin?
Hi All, Racing for the first time at Worksop this sunday and I know that its a low grip track. I have no experience with driving on this type of surface at all and was wondering if I could be pointed in the direction of a good set-up for the standard ZX5 (non SP non FS)? Something that I could work from.
Got the car handling great on high grip tracks but would appreciate some advice. I have trawled the set-up pages but not surprisingly most set-ups are now for SP or FS. I run 3600 trakpower lipos and an Atomic Carbon front tower. Cheers.
__________________
TEAM OCD - Everything has it's place.. Yokomo YZ10 Works91, Cougar 95, Lazer ZX-5, Ultima RB-5, Tamiya Avante, Durango DEX410, Cougar SV, Associated SC10FT, Tamiya F103GT, Supastox GT12, Yokomo YR-4 
|
|
#2
08-10-2009
|
||||
|
||||
|
Go
|
|
#4
09-10-2009
|
||||
|
||||
|
I have some set ups i can scan for you but nothing for Worksop.
Sorry  In fact they are all outdoor setups.
|
|
#5
09-10-2009
|
||||
|
||||
|
My mistake, I remember watching the Players last year and thought that the cork type surface seemed slippery. If its relatively good grip then I should be OK - well as OK as my driving allows!!
__________________
TEAM OCD - Everything has it's place.. Yokomo YZ10 Works91, Cougar 95, Lazer ZX-5, Ultima RB-5, Tamiya Avante, Durango DEX410, Cougar SV, Associated SC10FT, Tamiya F103GT, Supastox GT12, Yokomo YR-4
|
|
#6
09-10-2009
|
||||
|
||||
|
hiya i ran the standard zx5 a few years back. here is my tivertion setup
http://www.petitrc.com/setup/kyosho/...on20051206.htm the only change i would make from that is to add2-3mm of spacer in the d plate to reduce the front kick up and reduce the rear antisquat to 1mm and change the springs to either kit silver all round or to lime yelloow on the front with kit silver on the rear
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline 
|
|
#7
09-10-2009
|
||||
|
||||
|
My mistake, I remember watching the Players last year and thought that the cork type surface seemed slippery. If its relatively good grip then I should be OK - well as OK as my driving allows!!
__________________
TEAM OCD - Everything has it's place.. Yokomo YZ10 Works91, Cougar 95, Lazer ZX-5, Ultima RB-5, Tamiya Avante, Durango DEX410, Cougar SV, Associated SC10FT, Tamiya F103GT, Supastox GT12, Yokomo YR-4
|
|
#8
09-10-2009
|
||||
|
||||
|
Thanks Niggs, appreciate the help. see you on Sunday!!
__________________
TEAM OCD - Everything has it's place.. Yokomo YZ10 Works91, Cougar 95, Lazer ZX-5, Ultima RB-5, Tamiya Avante, Durango DEX410, Cougar SV, Associated SC10FT, Tamiya F103GT, Supastox GT12, Yokomo YR-4
|
|
#9
10-10-2009
|
||||
|
||||
|
Rob
Those who know drive in team shambles good luck sunday
__________________
 Website: http://www.wbmcc.co.uk/bingham-model-raceway.html Schumacher Cat Xls, Rc10 Team(retired), Mardave Cobra, SST 98 Rally Car, TT02 Rally car, Wpl-c24 and Element Enduro builders kit #71 #deaddogracing Autocare, unit 5 candleby Court, Cotgrave NG123RT.
|
|
#10
10-10-2009
|
||||
|
||||
|
Cheers Dave, now just off to polish my screwdrivers and colour-code my zip-ties!! Will be pitting with Lloyd and Chris so I might turn to the dark side and use a crisp packet to hold my rear wing on....... I thought I had seen everything!!
__________________
TEAM OCD - Everything has it's place.. Yokomo YZ10 Works91, Cougar 95, Lazer ZX-5, Ultima RB-5, Tamiya Avante, Durango DEX410, Cougar SV, Associated SC10FT, Tamiya F103GT, Supastox GT12, Yokomo YR-4
|
 |
| Thread Tools | |
| Display Modes | |
|
|
KYOSHO
more medium to high
sorry can't help with a setup.
Linear Mode
