|
#1
|
||||
|
||||
![]()
as i'm just starting out on the mad rat what with being a losi fan for almost 12 years now, anyone got the weights sussed out to stop the rat from popping up all over the place?
![]()
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. ![]() www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
#2
|
||||
|
||||
![]()
what motor are u running and what lipo? i have about 40g in the front its ok the front will lift with loads of power and if the slipper is to tight though
__________________
DO NOT BUY/SELL TO THIS USER. |
#3
|
||||
|
||||
![]()
hi mate i've got 160g in the front, on the servo and just in front of it.
i hope this helps Ginge
__________________
Reality Racing - Team Associated - Savox - CML |
#4
|
||||
|
||||
![]()
hi lads.
i'm running a x11 6.5 with a 4900 trakpower lipo. 21/78 gearing. do you find that the rat squats alot as you lay down the power on accelaration?
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. ![]() www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
#5
|
|||
|
|||
![]()
I have about 160g in the front also. basically as mch as you can pack in around the servo and steering assembly.
also some lead under the lipo, about 60g
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
![]() |
Thread Tools | |
Display Modes | |
|
|