help

[slipknot666]

Hi guys im completely new to electrics as ive only done nitro for about 4 years so complete novice with electric buggys. basically getting set up to go racing with a b4 with speed passion brushless system and was wondering if anyone could either let me come to theirs or come to mine and solder my motor and esc connections up as ive never soldered before. had a go but couldnt get it right so i need someones help. I;m in welshpool in wales so anyone local who could help please get in touch.

cheers
james

[emtee]

Hi mate, I can't get across to do the job for ya but I will offer a few tips for successful soldering...

1. cleanliness... make sure all old solder blobs on the parts to be soldered are removed as much as possible and your iron tip is clean..

2. A soldering iron of at least 40W is reqd..

3. feed the solder onto the iron tip..

4. "tin" (coat the with a small amount of solder..) the item before trying to join it..

Hope this helps ya, give it a go, seriously it isn't difficult...

[IceMike]

Originally Posted by slipknot666

Hi guys im completely new to electrics as ive only done nitro for about 4 years so complete novice with electric buggys. basically getting set up to go racing with a b4 with speed passion brushless system and was wondering if anyone could either let me come to theirs or come to mine and solder my motor and esc connections up as ive never soldered before. had a go but couldnt get it right so i need someones help. I;m in welshpool in wales so anyone local who could help please get in touch.

cheers
james

.

come down to oz and see me and ill sort u out mate

[slipknot666]

cheers thanks guys.

[neiloliver]

Originally Posted by IceMike

.

come down to oz and see me and ill sort u out mate

.. then when the wires fall off we can get one of the others to do it properly..