|
#1
|
|||
|
|||
![]()
With a standard spur, roughly what gearing will I look to run at most outdoor tracks (Mid West)?
I used to run a 23T pinion everywhere with the S2, no matter what track it was, would that be too far off with the B4? Ta ![]()
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#2
|
|||
|
|||
![]()
im thinking the 23t is way too high for a 6.5
18-19 maybe start off with |
#3
|
||||
|
||||
![]()
24 on a 7.5 i allways ran
so id say 23 should be fine dude- Tom Yardy is your best person to ask in the Mid West for a b4
__________________
Team Associated- HobbyWing- Reedy- CML |
#4
|
|||
|
|||
![]()
Cheers peoples
![]()
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#5
|
|||
|
|||
![]()
im running a 22t with my 6.5l in my b4 and could comfortably go to a 23t as temps are fine.
![]() |
#6
|
||||
|
||||
![]()
i always run mine on a 24
![]() |
#7
|
|||
|
|||
![]()
My B4 came with 18T/81T and a 6.5T xcelorin.
The motor was never hot. I found a medium esc setting for the initial exceleration was better. |
#8
|
|||
|
|||
![]()
Thanks for all the replys
![]()
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|